Over the last year and a half, I’ve been restoring a Ten Tec “Closet Kilowatt” from the late 80’s for a solar powered station. It consists of a model 253 Automatic Antenna Coupler, model 420 Hercules II amp and model 564 Omni VI Plus.
With the Ten Tec Argonaut 509 restored and working well, it was time to try it out. The Anderson Power Pole made it easy to connect an 8 amp hour gel cell. I hooked it up to my end-fed half-wave antenna and listened around 20 meters. There were plenty of CW signals and I quickly realized a CW filter was going to be needed.
By now, I’ve written about quite a few classic Ten Tec radios. There are those who would argue that the Argonaut, first introduced in 1972, started it all though. It was the first recognizably Ten Tec product and would set the style for decades to come. It was also the first popular QRP transceiver that included both CW and SSB modes.
Using several 20-foot 2 by 4’s that were left behind by the construction crew, and adding four 8-foot 4 by 4’s for mounting posts, there was enough lumber to build two 36-foot tilt-up masts. Spaced 150-feet apart, they supported a multi-band Zepp antenna center-fed with open-wire line.
I was having a lot of fun with the restored Ten Tec Omni (series C), but like all of the older Ten Tec radios, the Permeability Tuned Oscillator (PTO), aka VFO, left a little to be desired. Back in the day, when I bought my first Ten Tec, these PTOs were considered very good — but time marches on and we’ve gotten used to smoother and more stable VFOs. An upgrade would be nice.
I finished circuit repairs on a Ten Tec Triton IV transceiver and now it was time to address the grubby cosmetics of the radio. The radio had obviously been used as a mobile. Markings had been added to the front panel in Sharpie, and there was a yellowish film on the panel.
As I mentioned in an earlier post, I owned a Ten Tec Triton IV (model 544) in the late 70’s and always loved it. I traded the radio a few years later for an ICOM 720a (also a great radio), but always regretted losing the Triton. Fast forward about 40 years, and the gift of an old Triton II reminded of that first love. The Triton II is similar, but the IV had several refinements that made it really great at the time, and I decided to get one again.
In the last post, I described a used Ten Tec Triton IV and addressed the most immediate issues. I also mentioned making a cosmetic restoration, but after using it in the shack for an evening, it was apparent there were other problems. The “Offset Tuning” (OT) LED didn’t work, and more seriously, the transceiver didn’t always mute in transmit. Strange sounds issued from the speaker at times.
eBay has provided a lot of entertainment (and used equipment!) over the last few months, and after the purchase and restoration of a Ten Tec Century 21, I started looking for a Triton IV. This was the first radio I purchased new in 1978. I really enjoyed it and wanted to own one again. It didn’t take long. I ended up having two in the shop at almost the same time — one for my shack, and one for a fellow ham.
Over the years, Ten Tec has released a surprising number of CW (continuous wave or Morse Code) Keyers for Amateur Radio use. There have been two basic designs, single paddle and double or imabic paddle models. Released in about 1975, the Model 670 is a single paddle version, intended for use with the Century 21 CW transceiver.